RUBBER GLUE 4 GALLONS
12in x 12in x 12in
4 U.S. Gallons (15.14L)
+/- 450sq.ft per pail
Depend on floor type
45 lb (20kg)
Light green milky liquid
MGR-Glue 2.0 is a pressure sensitive adhesive that has been formulated for rubber flooring
Mainly used for our rubber rolls (PRO Series), our polyvinyl rolls (POLYVINYL Series) and our high-end rubber mats (PRIME Series)
MGR-Glue 2.0 helps control shrinkage and expansion in controlled environments; it is a solvent-free adhesive with very low odor, easy to apply and ideal for residential and commercial installations
Color change technology to know when it is ready to receive flooring
Once the flooring is installed, use a flooring roller to allow the adhesive to adhere well to both surfaces.
Consult the technical sheet above before starting your work.
Wait until the initial drying time is reached before putting the coating on the glue. The initial cure time may vary depending on the temperature and humidity of the room in which the siding is installed. It takes an average of 30 to 45 minutes. In order to validate if the initial drying time has been reached, touch the glue with your finger. If the glue remains on your finger, you must wait until it is drier.
- High initial tack reduces curl & shear strenght
- Dimensional stability reduces shrinking and expansion
- Excellent trowelability and easy to clean
- Solvent-free and low odor
- Maximum bond strenght
- NEW: Color change technology to know when it is ready to receive flooring